- Install the TeraTerm -> Start and use COM port to connect to console
You console configuration might be as follow
Data Bits 8
Stop Bits 1
Flow Control None
2. Connect to switch/switch using console
copy xmodem: run (This will copy the config to running config)
Once the transfer is started navigate in Teraterm to
File -> Transfer -> XMODEM -> Send… then select the file.
you can then run
and you configuration should be there.
If you have need to rename any file in the Cisco flash then you can use the following
dir – to display list of files in flash
2 -rwx 8055040 Mar 1 1993 14:24:51 +00:00 c2960-lanbasek9-mz.122-50.SE1.bing
rename flash:c2960-lanbasek9-mz.122-50.SE1.bing c2960-lanbasek9-mz.122-50.SE1.bin
then confirm destination file
Destination filename [c2960-lanbasek9-mz.122-50.SE1.bin]?
once done .
2 -rwx 8055040 Mar 1 1993 14:24:51 +00:00 c2960-lanbasek9-mz.122-50.SE1.bin
We can see that the file has been renamed correctly.